Note: The bleeding procedure will lower the vehicle, proceed with caution and refer to the factory repair manual for proper repair information, warnings and cautions!
Prerequisites:
- System is fault free
- Vehicle is NOT in Jack or Transport mode
- Vehicle is on flat level ground
- Engine running if vehicle is outside or in well ventilated area or use a battery maintainer
If the Security Access code does not work, try Login or Coding-II
[Select]
[34-Level Control]
[Security Access-16], [Login-11] or [Coding-II]
[08367]
[Basic Settings-04]
Enter:
Group 020 = to Bleed Pressure Accumulator
Group 021 = to Bleed Front Axle
Group 022 = to Bleed Rear Axle
Field-4 will display the current pressure
Note: System will time out after 60 seconds, the procedure maybe repeated as necessary to achieve the desired system pressure.
- Charging -
[Select]
[34-Level Control]
[Security Access-16], [Login-11] or [Coding-II]
[08367]
[Do it!]
[Basic Settings-04]
Enter:
Group [023] = to Charge Pressure Accumulator
Group [024] = to Charge Front Axle
Group [025] = to Charge Rear Axle
Field-[4] will display the current pressure
Note: System will time out after 60 seconds, the procedure maybe repeated as necessary to achieve the desired system pressure.
_________________ Gość Witamy na forum ATT http://pl.youtube.com/watch?v=350tD8E7htM POMAGAM TYLKO NA FORUM Piszę poprawnie po polsku.
niegdyś:
Audi 100 C3 2.0 D
Audi 80 1,8
Audi 80 Coupe 2,0
Audi 90 2.3
Audi V8 4,2
Audi A6 2.8 Quattro
Audi A6 1.8T Avant
Audi A6 1.8T Avant TIPTRONIC
Audi A6 2,4 AVANT TIPTRONIC
Audi A2 1,4 MPI
Audi A6 2.7 BI TURBO TIPTRONIC
Audi A2 1.4 TDI
Audi A6 1.9 TDI AVANT MULTITRONIC
Audi A4 B5 1.8
Audi A6 Allroad 2.5 TDI Tiptronic
obecnie:
Audi A6 3.0 quattro AVANT TIPTRONIC
Nie możesz pisać nowych tematów Nie możesz odpowiadać w tematach Nie możesz zmieniać swoich postów Nie możesz usuwać swoich postów Nie możesz głosować w ankietach Nie możesz załączać plików na tym forum Możesz ściągać załączniki na tym forum